MSC-DE1664 Product Manual
MapDest
Display destination matrix map. Only destinations are shown which have been
remapped. One destination number per line is shown separated by a colon ‘:’
and the destinations which are substituted for each level separated by commas.
MapDest Dest
Display mapping of a single destination.
MapDest Dest1 Dest2
Assign a destination mapping on all levels for Dest1 to physical Dest2.
MapDest Dest1 Dest2 Level
Assign a destination mapping on a single level for Dest1 to physical Dest2.
Examples
>MapDest
1:4,4
2:3,2
>MapDest 1
1:4,4
>
>MapDest 1, 5
>
>MapDest 1, 6, 2
>
The examples above are for a 2 level router. The first example queries the entire
destination map, which shows that destination 1 is remapped to physical destination 4
on both levels and destination 2 is remapped to destination 3 on the first level and
destination 2 on the second level. The second example queries the mapping for a single
destination. The third example maps destination 1 to physical destination 5 on all
levels. The fourth example maps destination 1 to physical destination 6 on the second
level only.
3.11.16 MapSrc Command
Routers only – Protocol version 3.0
Query or assign matrix source mappings. Source mappings provide a means to remap logical sources to
different physical sources for an added level of convenience when allocating and defining system I/Os.
Command
Description
MapSrc
Display source matrix map. Only sources are shown which have been
remapped. One source number per line is shown separated by a colon ‘:’ and
the sources which are substituted for each level separated by commas.
MapSrc Src
Display mapping of a single source.
MapSrc Src1 Src2
Assign a source mapping on all levels for Src1 to physical Src2.
MapSrc Src1 Src2 Level
Assign a source mapping on a single level for Src1 to physical Src2.
Examples
>MapSrc
1:4,4
Page 32 of 60
© 2013-2019 Matrix Switch Corporation
