MSC-DE1664 Product Manual
systems are supported).
[0 | 1]
Disable SDI reclockers (not all SDI router systems are supported).
[0 | 1]
Query or assign remote router syncing. Useful for creating a 3D system out
of 2 routers.
3.11 Command Reference
This section documents each MASCOT command in detail. Please note that command availability may vary
between firmware series and versions. Details of availability are documented for each command.
3.11.1 B Command
Carina series only
The B command is used for rebooting the system into Bootloader for software updates. See the
section for details.
3.11.2 C Command
Routers and MSC-GCP2U32 only
NOTE:
The C command queries the matrix size. The response is in the format “Dests,Srcs,Levels,Flags1,Flags2”.
Where “Dests” is the count of system destinations, “Srcs” is the count of sources and “Levels” is the number of
system levels. The Flags1 and Flags2 fields are currently unused and will be 0.
Example for a 16x16 system with 2 levels
>C
16,16,2,0,0
>
3.11.3 DestNames Command
Routers and MSC-GCP2U32 only
Query or assign destination names. This command has 4 variations, described by the following table.
Destination names are saved and recalled on power up.
Command
Description
DestNames
Query all destination names.
DestNames DEST
Query destination names for all levels of a given destination.
DestNames DEST, LEVEL
Query the name of a specific destination and level.
DestNames DEST, LEVEL, LABEL
Assign a label to a destination.
When querying names, labels are surrounded by double quotes and each level is separated by commas ',' (multi-
level systems only) and each destination is separated by newlines. Secondary levels use empty strings to
indicate that the label of the first level should be used.
Page 26 of 60
© 2013-2019 Matrix Switch Corporation
