Matrix Fitness R7XE-04, Руководство по обслуживанию

Страница: 64 / 85

61
9.16 loWer CoNTrol BoArD rePlACeMeNT
1) Remove the rear shrouds as outlined in Section 9.13.
2) Disconnect the 5 wire connections to the lower board (Figure A).
3) Remove the 2 screws holding the lower board to the frame (Figure B), and remove the lower board.
4) Reverse Steps 1-3 to install a new lower board. Figure C shows the electrical connections to the lower board.
5) Test the bike for function as outlined in Section 9.23.
fIgUre A
fIgUre B
fIgUre C
3 Pin Connector from
the Generator
2 Pin Connector
from the Resistor
8 Pin Connector
from the Console
2 Pin Connector from
the AC power source
2 Pin Connector
from the Battery
CHAPTer 9: PArT rePlACeMeNT gUIDe