MX-FW62
SMITH MACHINE
ASSEMBLY GUIDE
PROPER USAGE
1. Do not use any equipment in any way other than designed or intended by the manufacturer.
It is imperative that weight stack machines as well as any other MATRIX Fitness Systems, Inc. equipment are used properly
to avoid injury.
2. Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by
MATRIX Fitness Systems, Inc.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.
If unreadable or missing, contact your local dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over.
This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
liability to a minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
MATRIX Fitness Systems, Inc. will provide service and maintenance training at our corporate facility upon request.
SPECIFIC OPERATING WARNINGS
1. Routinely inspect all accessory clips that join attachments to the machine and replace at the first sign of wear.
2. Use only weight selector pins supplied by MATRIX Fitness Systems, Inc. on weight stacks. Substitutes are forbidden.
3. Belts and cables pose an extreme liability if used when frayed. Always replace any belts and cables at first sign of wear
(consult MATRIX Fitness Systems, Inc. if uncertain).
4. Do not allow users to wear loose fitting clothing while using equipment. It is also recommended to have users' secure long
hair back and up to avoid contact with moving parts.
5. Fully insert weight selector pins. Partial insertion can cause weights to fall unexpectedly.
Never remove selector pin if any weights are suspended. Never attempt to release jammed weights or parts.
IMPORTANT SAFETY INSTRUCTIONS
PARTS DESCRIPTIONS
Sep 24, 2004
F I T N E S S S Y S T E M
B20
B21
B22
B24
B25
B26
B27
B28
B29
B30
B33
B34
B42
B43
M09
M10
M11
M13
M14
M15
M16
N07
N10
V12
4
4
8
2
4
20
20
20
20
16
4
2
4
8
4
4
4
4
2
2
8
6
2
1
MD0101007C
MB0304036B
MB06C8001C
SP1027001AA
ML0247010F
MJ4905002D
ME0501028
ME0502174
ME0112162
ME0101007
SP1028001AA
MJ4906002G
MB0604044AA
ME0111001AC
ME0901028
MD0510006A
MD0501009
ME0901029
ME0902018
ME0512002A
MB1119002AA
MD0504038A
MB0501007CA
ME1201002
Slide Pulley(90)
Ellipse Foot
Pulley Cover
Balance Block
Cable
Hook
Spring Washer
Pin Tether Bolt Spring Washer
Bolt, Cap-End Allen
Bolt
Counterweight Stop
Guide Rod
Bushing
Bolt, Round-Hex Socket
Internal C-Clip
Linear Bearing
Sealed Bearing Set
Internal C-Clip
Top Plate Guide Sleeve C-Clip
Roll Washer
POM Stop
Weight Stack Bushing
Rubber Bumper
Rivet
90.2
ABS
4.8
×
2330
S45C
SW12 12.2
×
21.5
×
3t
13
×
26
×
2.5t
M12
×
1.75P
×
25L
M4
×
0.7P
×
10L
M8
×
1.25P
×
15L
R-55
THOMSON SSE M30 WW
6006ZZ
R-47
S-30
S45C
POM
LFF-3020
1/8"
×
7.5L
Z01
Z02
Z03
Z04
Z05
Z07
Z08
Z11
Z12
Z13
Z15
Z16
Z17
Z18
Z19
Z20
Z21
Z22
Z23
Z24
Z26
Z27
Z30
ME1007033A
ME1007024A
ME1007031A
ME1007027A
ME1005001
ME1001017A
ME1001019A
ME0501028
ME0502174
ME0112162
ME0502172
ME0112024AE
ME0112144
ME0112175
ME0112182A
ME0112217A
ME0502173
ME0501027
ME0204028
ME0104045AB
ME0105051AC
ME0114059A
ME0204008
Allen Wrench
Allen Wrench
Allen Wrench
Allen Wrench
Phillips Screwdriver
Wrench
Wrench
Spring Washer
Pin Tether Bolt Spring Washer
Bolt, Cap-End Allen
Pin Tether Bolt Spring Washer
Bolt, Cap-End Allen
Bolt, Cap-End Allen
Bolt, Cap-End Allen
Bolt, Cap-End Allen
Bolt, Cap-End Allen
Pin Tether Bolt Spring Washer
Spring Washer
Nylon Nut
Bolt, Round-Head Allen
Screw
Settle Bolt
Nylon Nut
M2.5
×
55L
M5
×
70L
M6
×
80L
M8
×
120L
#13
#17
SW12 12.2
×
21.5
×
3t
13
×
26
×
2.5t
M12
×
1.75P
×
25L
8.4
×
15.5
×
1.6t
M8
×
1.25P
×
20L
M10
×
1.5P
×
25L
M10
×
1.5P
×
80L
M10
×
1.5P
×
120L
M10
×
1.5P
×
100L
10.5
×
18
×
2.0t
SW10 10.2
×
18.4
×
2.5t
M10
×
1.5P
M6
×
1.0P
×
15L
M6
×
1.0P
×
15L
M5
×
0.8P
×
8L
M8
×
1.25P
1
1
1
1
1
1
10
10
10
14
14
4
4
4
4
12
12
8
4
12
6
6
