background image

3

CHAPTER 2: IMPORTANT SAFETY INSTRUCTIONS

2.2 BEFORE GETTING STARTED

LOCATING THE UNIT

Place the equipment on a level and stable surface away from direct sunlight. The intense UV light can cause discoloration on the plastics. Locate 

your equipment in an area with cool temperatures and low humidity. Please leave a clear zone on all sides of the equipment that is at least 60 cm 

(23.6”). This zone must be clear of any obstruction and provide the user a clear exit path from the machine. Do not place the equipment in any area 

that will block any vent or air openings. The equipment should not be located in a garage, covered patio, near water or outdoors.

LEVELING THE EQUIPMENT

It is extremely important that the levelers are correctly adjusted for proper operation. Turn leveling foot clockwise to 

lower and counter-clockwise to raise unit. Adjust each side as needed until the equipment is level. An unbalanced 

unit may cause belt misalignment or other issues. Use of a level is recommended.

PROPER USAGE

1.  Sit on the cycle facing the handlebars. Both feet should be on the floor one on each side of the frame. 

2.  To determine proper seat position, sit on the seat and position both feet on the pedals. Your knee should bend slightly at the furthest pedal 

position. You should be able to pedal without locking your knees or shifting your weight from side to side.

3.  Adjust pedal straps to desired tightness.

4.  To get off of the cycle, follow the proper usage steps in reverse.

TRAINING AREA

2 M

(78.7”)

0.56 M

(22.2”)

1.45 M

(57.2”)

FREE AREA

2 M

(78.7”)

1.76 M

(69.4”)

2.65 M

(104.4”)

Содержание CXC FC20

































Отзывы: