RMWC KEYPAD
INDICATORS
PUSH BUTTONS
SYSTEM
TEST
MAINS WATER
RAIN WATER
SYSTEM FAULT
Rain / Mains Water Controller
DANGER - HIGH VOLTAGE
DO NOT REMOVE COVER. AUTHORIZED PERSONS ONLY
SYSTEM
TEST
RAIN WATER
MANUFACTURED BY MATelec AUSTRALIA EMAIL: [email protected]
A quick reference to the controller’s Keypads and Indicator functions and meanings.
DPC KEYPAD
INDICATORS
PUSH BUTTONS
DISTRIBUTED BY:
8
INSTALLATION DATE:
SERIAL NUMBER:
AT A GLANCE
PUMP ON
FAULT
PUMP ON
FAULT
POWER ON
FLASHING
A prime loss fault has occurred.
FAULT
POWER ON
Power is turned on.
STEADY:
HIGH LEVEL
FLASH:
LOW LEVEL
LEVEL ALARM
LEVEL ALARM ON
A high level alarm has been
present for the preset time.
FLASHING
A low level alarm is present.
PUMP ON
ON STEADY
A pump fault/overload has
occurred.
ON STEADY
Pump switched on to run.
If selected (the LED indicator
will confirm if on) the pump is
set to Manual Pumping Mode
MAN
If selected (the LED indicator
will confirm if on) the particular
pump is set to Automatic
Pumping Mode
AUTO
Silences the siren and if held
down for 3 seconds, clears all
faults
MUTE/
RESET
PRESS AND HOLD
FOR 3 SECONDS
TO RESET
Turns all pumps off
OFF
Light illuminates when mains
water valve is open
Light illuminates when Rain
Water is available and the
Mains Water valve is closed.
Light illuminates when a pump
fault or a flow fault is present.
Pressing this button will
change the status of the valve
regardless of what state it is
in.
SYSTEM
TEST
SYSTEM FAULT
RAIN WATER
MAINS WATER
SYSTEM
TEST
MAINS WATER
RAIN WATER
SYSTEM FAULT
Rain / Mains Water Controller
DANGER - HIGH VOLTAGE
DO NOT REMOVE COVER. AUTHORIZED PERSONS ONLY
