Matelec FPC-30040-CON, Руководство по эксплуатации для владельца

Страница: 9 / 12

9
83
16 A1 18
15
A2
C
D
H
min
max
A1 A2
H D
15 18
16 C
Un
max
A1 A2
H D
15 18
16 C
Un
t t
t t
HRH-5
8595188136396
Indication of supply voltage
Choice of function
Function PUMP UP Function PUMP DOWN
Relay is designed for monitoring levels in wells, basins, reservoirs, tanks...
In one device you can choose the following confi gurations:
- one-level switch of conductive liquids (by connecting H and D)
- two-level switch of conductive liquids
One-state device monitors one level, two-state device monitors two levels (switches on one level
and switches off on another level)
Choice of function PUMP UP, PUMP DOWN
Adjustable time delay on the output (0.5 - 10s)
Sensitivity adjustable by a potentiometer (5-100kΩ)
Measuring frequency 10Hz prevents polarization of liquid and raising oxidation of measuring probes
Galvanically separated supply voltage UNI 24.. 240 VAC/DC
Output contact 1xchangeover/SPDT 8A/250V AC1
1-MODULE, mounting onto a DIN rail
Level switch HRH-5
Monitoring of two levels
2
A1 - A2
24... 240 V AC/ DC (AC 50 - 60 Hz)
max. 2 VA
-15 %; +10 %
adjustable in range 5 kΩ -100 kΩ
max. AC 3.5 V
AC <0.1 mA
max. 400 ms
800 nF (sensitivity 5kΩ), 100 nF (sensitivity 100 kΩ)
adjustable, 0.5 -10 sec
1.5 sec
± 5 %
1x changeover/ SPDT (AgNi / Silver Alloy )
8 A / AC1
2500 VA , 240 W
250 V AC1 / 24 V DC
500 mW
1x10
7
1x10
5
-20 °C to +55 °C (-4 °F to 131 °F)
-30 °C to +70 °C (-22 °F to 158 °F)
3.75 kV (supply - sensors)
any
DIN rail EN 60715
IP 40 from font panel / IP 10 terminals
III.
2
AWG 10 (2.5 mm2)
90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝)
72 g (2.5 oz.)
EN 60255-6, EN 61010-1
see pg. 90-91
Functions:
Supply terminals:
Voltage range:
Input:
Toleration of voltage range:
Measuring circuit
Sensitivity ( input resistance):
Voltage n electrodes:
Current in probes:
Time response:
Max. capacity of probe cable:
Time delay (t):
Time delay after switching on (t1):
Accuracy
Accuracy in setting (mechanical):
Output
Number of contacts:
Current rating:
Switching voltage:
Switched voltage:
Min. switched output DC:
Mechanical life (AC1):
Electrical life:
Other information
Operational temperature:
Storing temperature:
Electrical strenght:
Operational position:
Mounting:
Protection degree:
Overvltage category:
Pollution degree:
Profi le of connecting wires (mm
2
):
Dimensions:
Weight:
Standards:
Recommended measuring probes:
Connection
Function
Device description
Technical parameters
Tank with
monitored level
Relay is designated for monitoring of levels of conductive liquids with possibility of functions: PUMP UP
or PUMP DOWN. To prevent polarization and liquid electrolysis of liquid, and undesirable oxidation of
measuring probes, alternating current is used. For measuring use three measuring probes: H- upper level,
D- lower level, C - common probe. In case you use a tank made of a conductive material, you can use
it as probe C. In case you require monitoring of one level only, it is neccessary to connect inputs H and
D and connect them to one probe - in this case sensitivity is lowered by half (2.5... 50kΩ). Probe C can
be connected with a protective wire of supply system (PE). To prevent undesirable switching out output
contacts by various infl uences (sediment on probes, humidity...) it is possible to set sensitivity of the device
according to conductivity of monitored liguid (corresponding to “resistance” of liquid) range 5 up to 100kΩ.
To reduce infuences of undesirable switching of output contacts by liquid gorgle in tanks, it is possible to set
delay of output reaction 0.5 - 10s.
Symbol
!
!
!
!
!
!
!
!
!
!
Monioring of one level
Un
max
level
min
15-18
red LED
Un
max
level
min
15-18
red LED
Tank with
monitored level
Supply voltage terminals
Terminals for conection of
probes H, D
Output indication
Choice of function
Adjustment of
delay on output
Terminal for connection of
probe C
Output contacts
EAN code
HRH-5 /UNI