DOC: DPC 30000 & 30005
REVISED: 220410
HIGH
LEVEL
ON STEADY
High Level Fault has occurred during three successive pump runs
SLOW FLASH
Overload/Thermostat Fault has occurred during three successive pump runs
FAST FLASH
Maximum run time has been exceeded during three successive pump runs
ON STEADY
Pump switched on but not running
FLASHING
Pump switched on and running
HIGH LEVEL ON
A high level has been present for more than 3 minutes
RUNNING
FAULT
PUMP 1
PUMP 2
FOR SINGLE FLOAT SWITCH APPLICATIONS, CONNECT CLOSE ON RISE FLOAT SWITCH TO ‘START’ CONTACTS
EARTH
EARTH
EARTH
A
CTIVE
NEUTR
AL
A
CTIVE
NEUTR
AL
PUMP 1
PUMP 2
SUPPLY 240Vac
A
CTIVE
NEUTR
AL
240Vac
SUPPLY
WARNING: HIGH VOLTAGE
WIRING CONNECTION DETAIL
FPC-30000 & FPC-30005
INDICATOR LIGHTS GUIDE
ALL ELECTRICAL CONNECTIONS MUST BE CARRIED OUT
BY A SUITABLY QUALIFIED ELECTRCIAN
ACCESS BY AUTHORISED PERSONNEL ONLY
HIGH
LEVEL
ON STEADY
High Level Fault has occurred during three successive pump runs
SLOW FLASH
Overload/Thermostat Fault has occurred during three successive pump runs
FAST FLASH
Maximum run time has been exceeded during three successive pump runs
ON STEADY
Pump switched on but not running
FLASHING
Pump switched on and running
HIGH LEVEL ON
A high level has been present for more than 3 minutes
RUNNING
FAULT
FOR SINGLE FLOAT SWITCH APPLICATIONS, CONNECT CLOSE ON RISE FLOAT SWITCH TO ‘START’ CONTACTS
WARNING: HIGH VOLTAGE
WIRING CONNECTION DETAIL
FPC-30000 & FPC-30005
INDICATOR LIGHTS GUIDE
ALL ELECTRICAL CONNECTIONS MUST BE CARRIED OUT
BY A SUITABLY QUALIFIED ELECTRCIAN
ACCESS BY AUTHORISED PERSONNEL ONLY
START/MEDUIM
LEVEL
FLOAT SWITCH
HIGH ALARM
LEVEL
FLOAT SWITCH
COMMONCOMMON
N/O CL
OSE ON RISE
COMMON
N/O CL
OSE ON RISE
INPUT 3
START
LEVEL
INPUT 4
HIGH
LEVEL
FLOAT SWITCH CONNECTIONS
12Vdc CONNECTIONS
BLUE NOT REQUIRED
PUMP 1
PUMP 2
EARTH
A
CTIVE
NEUTR
AL
A
CTIVE
NEUTR
AL
PUMP 1
PUMP 2
SUPPLY 240Vac
A
CTIVE
NEUTR
AL
240Vac
SUPPLY
STOP/LOW
LEVEL
FLOAT SWITCH
START/MEDUIM
LEVEL
FLOAT SWITCH
HIGH ALARM
LEVEL
FLOAT SWITCH
COMMON
N/O CL
OSE ON RISE
LOW ALARM
REDUNTANT STOP
FLOAT SWITCH
COMMON
N/O CL
OSE ON RISE
COMMONCOMMON
N/O CL
OSE ON RISE
COMMON
N/O CL
OSE ON RISE
INPUT 2
STOP
LEVEL
INPUT 3
START
LEVEL
INPUT 4
HIGH
LEVEL
AUX
CODED
DATA
OUTPUT
BMS
INPUT 1
LOW
LEVEL
FLOAT SWITCH CONNECTIONS
12Vdc CONNECTIONS
BLUE NOT REQUIRED
SET THERMAL OVERLOADS TO SUIT PUMP
1. Controller enclosure must be
mounted in a vertical position.
2. Ensure mounting method
does not compromise enclosure
weather proof rating.
3. Ensure access to main isolator
is not restricted.
4. Ensure cables/conduits
entering the panel have
mechanical protection and that
the penetrations are
sealed and do not compromise
the weather proof rating of the
enclosure.
MOUNTING
FRONT VIEW
Top
Bottom
Top
Bottom
Mounting
Frame/
Wall
CONNECTION
OFF
ON
P U M P 1
P U M P 2
D U A L P U M P C O N T R O L L E R
AUTO
OFF
AUTO
OFF
MAN
MAN
MUTE/
RESET
PUMP ON
PUMP ON
FAULT
FAULT
LEVEL
ALARM
POWER
ON
Steady - Overload
Flash - Prime Loss
Steady - Overload
Flash - Prime Loss
Press and hold
for 3 secs to reset
Steady - High Level
Flash - Low Level
INSTALLATION
SIDE VIEW
3
NOTE:
Controller must be earthed and all electrical connections must be carried out by a suitably qualified
Electrician. For Single Working Level Float Switch Applications, connect to “Start (Input 3)” terminals
only, and NO bridge wire is required in “Stop (Input 2)” terminals.
