POTATO PEELERS MANUAL'S BOOK
(Figure 1):
1.2. DIFFERENT MODELS
Control the features of your machine whether they comply with the descriptive info on the
label or not.
PAT-
Potato Peeler (Changeable Disc)
PAT Z-
Potato Peeler (With Reductor)
T-
Threephase
M-
Monophase
3.2. PLACING
· Put your machine on a smooth floor.
· Be sure that the machine is stable while your machine is running.
3.3. ELECTRICAL CONTACT
· Make sure that the electrical contact of your machine is certainly done by a qualified
person or people.
· Be sure that the voltage of your electrical system is same with the voltage which is written
on your machine’s label.
The machine must be earthed with yellow/green cable
1. INTRODUCTION
1.1. DEFINITION
MATEKA Potato Peelers reduce potato peeling time so that lightens your workload.
About MATEKA Potato Peelers;
. AISI 304 stainless steel body
. Removable subdisc
· Changeable sandpaper
. Automatic or via stopcock water access
. Timer
A
B
C
D
E
F
3. INSTALLATION
Make sure that the installation of your machine is certainly done by a qualified person or
people.
3. 1. CARRYING
Prefer to carry the machine with a pallet or a forklift. If you do not have an opportunity like this,
do not carry it alone. The centre of gravity of the machine is in the middle of the body. Consider
this point while you are carrying the machine with a forklift, a pallet or in another way.
Take all precautions to not to fall over the machine. The centre of gravity of the
machine is in the middle of the body
Certainly do not carry the machine by dragging it on the ground
4. USAGE AND SAFETY
4.1. ACTION
Mount your machine’s water access connection with the hose that was given to you with
your machine.
Clean the potatoes that you want to peel, and be sure that they are not muddy.
Put the potatoes in acceptable amounts and close top and front covers. For maximum
capacities info
(
Table 1)
Plug your machine.
Set the time of running your machine through timer which is on control panel,
(
Figure 2)
Press start button and run the machine
(
Figure 2)
If you stop your machine before the adjusted time, just press stop button
(
Figure 2)
A— Control Panel
B– Top Cover
C– Front Cover
D– Front Cover Handle
E– Body
F– Disc
