S P E C I F I C A T I O N S
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Max. Free Speed .............................................................20,000 RPM
Collet Size ......................................................................................1/4"
Air Inlet ................................................................................. 1/4" NPT
Vibration Level ...................................................................... 0.9 m/s²
Horse Power ................................................................................. 0.75
Min. Air Hose Size ...................................................................3/8" ID
Average Air Consumption ................................................... 3.4 CFM
Recommended Air Pressure ..................................................90 psig
Sound Level ............................................................................85 dBA
Length ...............................................................................................7"
Net Weight ............................................................................... 1.8 lbs.
• Operating Instructions
• Warning Information
• Parts Breakdown
Copyright © Professional Tool Products, 2018
All rights reserved
MT4883
MT4883G
MT4883O
WARNING
MEULEUSE DIE GRINDER À ANGLE DROIT ,75 HP
RIGHT ANGLE
DIE GRINDER
.75HP
DISCO ABRASIVO DE ÁNGULO RECTO .75 HP
RATED RPM OF THE
ACCESSORY USED MUST
EXCEED THE MAXIMUM
TOOL RPM SHOWN
ALWAYS READ
INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR HEARING
PROTECTION
ALWAYS WEAR FACE
PROTECTION
ALWAYS WEAR HAND
PROTECTION
AVOID PROLONGED
EXPOSURE TO VIBRATION
WARNING
RPM
RPM
RPM
