12MM-DSTM1
INSTRUCTION MANUAL
SAFETY USE
WARNING
CONTENTS
Safety use
Warning
Note
1 Overview
1.1 Features
1.2 Accessories
2 Introduction of panel function
2.1 Remote Control
2.2 Front panel introduction
2.3 Top panel introduction
2.4 Rear panel introduction
3 Detail operation guide
3.1 Satellite
3.1.1 Spectrum Analyzer
3.1.2 Constellation Analyzer
3.1.3 Satellite Setting
3.1.4 Satellite Finding
3.1.5 Angle Calculation
3.2 Terrestrial
3.3 System Setting
3.3.1 Device Setup
3.3.2 Time
3.3.3 System
3.3.4 Option
3.4 Program
3.5 Multimedia
3.6 Upgrade
4 Technical Specifications
1. Consumers who using the product for the first time should read this manual
carefully.
2. The LCD is not a touch screen.
3. Do not place heavy items on the device.
4. Do not leave the device near to heat sources, in direct sunlight, in places
with strong mechanical vibration or dusty environments.
5. Please place the device in ventilated surroundings.
6. The device should be fully charged before using for the first time
(recommend 6 hours for the first charge).
7. Contact Matchmaster Communications Pty Ltd if malfunction of the device
happens.
8. Damaging the device on operation without following the guideline will not
be warranted.
1. Avoid using batteries near heat sources.
2. Do not get wet.
3. Avoid charging in heated locations or direct sunlight.
4. Charge using only charging accessories supplied.
5. When the battery is being charged by vehicle charger please ensure the
polarity of the charging connection is correct.
NOTE
1. Antistatic: The battery is equipped with a protective circuit to avoid the
occurrence of various accidents. Do not use the battery in the generation of
static electricity as static electricity (100V or above) will easily damage the
protection circuit which may lead to battery failure or damage, heat causing
smoke/fire or deformation of the battery pack.
2. Charge temperature range: Recommended charge temperature range is
0~45. Charging in an environment beyond this range may cause a decrease
in battery performance and reduce the life span.
3. Charging mode: Please use the supplied charger in the recommended
environment for the battery charge. After discharge of the battery, please
charge the battery in time. * Due to the special characteristics of the car
charging, the battery cannot reach the saturation state when the vehicle is
used to charge the battery.
4. First use: With the first use of the battery, if the battery is not clean or an
abnormal smell or other abnormal behavior is noted, please discontinue
charging and return to Matchmaster Communications Pty Ltd.
5. When the meter is not in use for a long period of time it is best to remove
the battery from the device and place in a low temperature and humidity
environment for optimal preservation.
6. Battery period of guarantee: The warranty period is 6 months from the
date of shipment. However, if the problem is not due to the failure of
the manufacturing process, but instead due to improper use or storage
warranty will not be applied.
1 OVERVIEW
The 12MM-DSTM1 is an HD digital signal meter and portable device for
installation and adjustment of satellite and terrestrial receiving antennas.
FOR TECHNICAL SUPPORT CALL 1800 237 425 OR VISIT WWW.MATCHMASTER.COM.AU | PAGE 1 OF 4
1.1 Features
• Combination of DVB-S/S2 and DVB-T/T2
• High resolution 5’’TFT LCD
• Multi-lingual OSD and use-friendly user interface
• Supports Spectrum function
• Real time constellation display
• Support TP search and blind search
• USB 2.0 for software update/media play back
• Supports time shift
• Supports TP PVR
• Supports program edit (move/skip/lock/delete/rename)
• Supports electronic program guide (EPG)
• Supports HDTV video/audio output
• Supports AV input for monitor/camera installing
• Supports DC+12V out for monitor installing/Amplifier testing
• Ease of use via shortcut keys
• Supports RCU
• Built in loudspeaker for audio playback
• Visual and audible signal when signal received
• Built in LED light
• Large lithium battery capacity(4000mAh)
1.2 Accessories
1x Manual
1x Power Adapter
1x Power Line
1x Car Adaptor
1x Connector F to F type
1x Connector F to IEC type
1x Connector BNC to AV
2x AV Cable
1x Remote Control Unit (RCU) 1x Carry Bag
2 INTRODUCTION OF PANEL FUNCTIONS
2.1 Remote Control
1. Power
2. Show the teletext content if
teletext is transmitted
3. Subtitle language
4. Sleep
5. Find
6. Play, stop and pause
7. Main menu
8. Confirm the highlighted menu
item. Open the channel list
9. Left and right
10. EPG
11. Fast backward and fast forward
12. Numeric key (0-9)
13. Favorite channel
14. Mute
15. Multi-coloured buttons
16. Zoom
17. PVR
18. Photo grid show
19. Recall
20. Start recording
21. Exit
22. Up and down
23. Display information
24. TV/radio
25. Play previous item and
play next item
26. Satellite list
27. Audio language
2.2 Front Panel Introduction
1. Long press for 3~4 seconds to
switch the device power on/off
2. Power indicator
3. Battery indicator (Red light
for charging, green light for
fully charged)
4. 13V indicator
5. 18V indicator
6. 22KHz indicator
7. Signal Locked indicator
8. F1~F4: shortcut keys
9. Numeric keys
10. GOTO: Select satellite or transponder
11. DOT: use for input data, Long press 3~4seconds for turn on LED floodlight
12. SCREEN: Turn on or turn off the screen display (Long press close backlight)
13. MUTE: turn on or turn off the voice
14. SPEC: shortcut key for spectrum analyzer
15. CONS: shortcut key for constellation analyzer
16. FIND: shortcut key for satellite finding
17. ANGLE: Shortcut key for Angle calculation
18. Navigation keys: The keys offer the movement of cursor to desired position
19. OK: confirm key
20. MENU: Show main menu
21. EXIT: exit menu (main menu or sub menu)
22. Digitron : Show the current signal quality
23. LCD screen
1
8
8
2
7
3
4
5
6
9
11
20
21
18
19
17
15
13
22
16
14
12
10
14
1
15
17
19
21
23
27
25
24
26
22
20
16
18
3
5
7
10
13
11
12
8
9
6
2
4
