13
Dear Customer,
Congratulations on your purchase of this high-qua-
lity MATCH product.
With the PP 41DSP, MATCH is setting new stan-
dards in the evolving plug & play market.
We wish you many hours of enjoyment with your
new MATCH PP 41DSP.
Yours,
AUDIOTEC FISCHER
General installation instructions for MATCH
components
To prevent damage to the unit and possible injury,
read this manual carefully and follow all installati-
on instructions. This product has been checked for
proper function prior to shipping and is guaranteed
against manufacturing defects.
Before starting your installation, disconnect
the battery’s negative terminal to prevent
damage to the unit, fire and/or risk of injury.
For
a proper performance and to ensure full warranty
coverage, we strongly recommend to get this pro-
duct installed by an authorized MATCH dealer.
Install your PP 41DSP in a dry location with suf-
ficient air circulation for proper cooling of the
equipment. The amplifier should be secured to
a solid mounting surface using proper mounting
hardware. Before mounting, carefully examine the
area around and behind the proposed installati-
on location to insure that there are no electrical
cables or components, hydraulic brake lines or any
part of the fuel tank located behind the mounting
surface. Failure to do so may result in unpredictable
damage to these components and possible costly
repairs to the vehicle.
General instruction for connecting the PP
41DSP amplifier
The PP 41DSP may only be installed in vehicles
which have a negative ground electrical system.
Any other system may cause damage to the
amplifier and the electrical system of the vehicle.
Use only the provided MATCH cable for con-
nection of the PP 41DSP. The use of other
cables can result in damage of the ampli-
fier, the head unit / radio or the connected
loudspeakers!
Prior to installation, plan the wire routing to
avoid any possible damage to the wire harness. All
cabling should be protected against possible crus-
hing or pinching hazards. Also avoid routing cables
close to potential noise sources such as electric
motors, high power accessories and other vehicle
harnesses.
The fuse may only be replaced by an
identically rated fuse (20 A) to avoid damage of
the amplifier.
Congratulations!
General instructions
