13
Function Buttons
Function Button
Description
ESC/PROG
To enter or exit setting mode.
ENTER
To confirm the selection/value in setting mode.
RUN
To turn on the unit, press this button for at least 1 second.
STOP/RST
To turn off the unit, press this button for at least 1 second.
To reset fault message, press this button for at least 1 second.
To increase the setting value.
To decrease the setting value.
and ENTER
Press these two buttons at the same time to move cursor location.
Parameter Setting
The entire display setting program structure is demonstrated as below chart.
