Masterflex ISMATEC 78018-50, Руководство по эксплуатации, Страница: 43 / 65

3-34 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
Section 3: Operation
Masterflex
MASTERFLEXLIVE™
The REGLO Digital Pump Drive can be controlled and monitored through the MasterflexLive™ website
using an Ethernet or Wi-Fi connection. MasterflexLive™ can be accessed from any suitable digital device
connected to the internet, such as a laptop, tablet, smartphone or desktop computer. See www.masterflex.com
for more information.
MasterflexLive™ Run Screen
The MasterflexLive™ Run Screen is only displayed on the pump drive touchscreen while the pump drive is
being operated through the MasterflexLive™ website. The screen displays the currently selected operation
dispense settings (Continuous, Time or Volume).
A. MODE NAME BANNER: Displays the Mode Name as well as the currently selected input type. Tap the
Mode Name Banner to return to the Mode Selection Screen.
B. START/STOP: During operation, the display will change from START to STOP .
C. LOGOUT: Tap to log out a user.
NOTE: This option is only available if Manage User is enabled in
Settings (for further information see " User Management " on page 3-9).
D. SCREEN LOCK: Locking the screen disables all touchscreen functions.
To lock the screen:
Press and
hold UNLOCKED until the icon changes to LOCKED and a red border appears around the
screen.
To unlock the screen:
Press and hold LOCKED until the icon changes to UNLOCKED .
General Preparation:
• Confirm the correct transfer tubing is securely attached to the pump head.
• Confirm all fluids and containers are ready.
• Switch the drive on using the power switch located at the rear of the drive.
NOTE: If Manage User
B. Stop
D. Screen Lock
A. Mode Name Banner
C. Logout