Masterflex ISMATEC 78018-50, Руководство по эксплуатации, Страница: 35 / 65

3-26 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
Section 3: Operation
Masterflex
K. START/STOP/PAUSE: During operation, the display will change from START to PAUSE STOP/
RESET .
L. FLOW DIRECTION: Tap DIRECTION to select either clockwise or counterclockwise flow
direction.
NOTE:
Flow Direction is unavailable on single direction gear pumps and will be grayed out.
M. SCREEN LOCK: Locking the screen disables all touchscreen functions. To lock the screen: Press and
hold UNLOCKED until the icon changes to LOCKED and a red border appears around the
screen. To unlock the screen: Press and hold LOCKED until the icon changes to UNLOCKED .
N. LOGOUT: Tap to log out a user.
NOTE:
This option is only available if Manage User is enabled in
Settings (for further information see " User Management " on page 3-9).
O. SETTINGS: Tap to access the Settings Screen (for further information see " Settings " on page 3-5).
Volume Mode Edit Screen
Volume Dispense Mode Operation
General Preparation:
• Confirm the correct transfer tubing is securely attached to the pump head.
• Confirm all fluids and containers are ready.
• Switch the drive on using the power switch located at the rear of the drive.
NOTE:
If Manage User
is enabled you may be prompted for a Username and Password (for further information see " User
Management " on page 3-9). The touchscreen display will revert to the previously used operation mode.
• Confirm that the pump head has been calibrated by checking that Calibration Complete is displayed on
the Volume Mode Edit Screen (for further information see " Pump Head Calibration " on page 3-12).
• If required, prime the pump before operation (for further information see " Priming the Pump " on page
3-11).
Volume Record
Calibrate
Interval Time
Confirm
Batch Total
Mode Name Banner
Volume
Flow Rate
Head Options
Anti-Drip
Tap to access the
Dispense Volume Screen
Tap to return to
the previous screen
Tap to access the
Flow Rate Edit Screen
Tap to access the
Head Options Screen
Tap to access the Anti-Drip Screen
(see " Anti-Drip " on page 3-29)
Tap to access the
Interval Time Screen
Tap to access the
Tube Calibration Screen
Tap to access the
Batch Total Screen
Tap to record fluid volumes (see
" Volume Record " on page 3-29)
Logout