MasterCraft 54-6622-6 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 9

MasterCraft 54-6622-6 Скачать руководство пользователя страница 1

1

OPERATING MANUAL

Planer

54-6622-6

Specifications:
Motor:

120 V 60Hz 6.0 A

Motor speed: 17,000 RPM (no load)
Planing capacity:

Width

3 1/4”

Thickness 5/16” (8mm)
Depth 5/64” (2mm)

Number of blades: 2
Net Weight: 7 lb 1 oz

(3.2 kg)

IMPORTANT:

Read through this operating manual carefully before using your new tool. Pay close
attention to all

Safety Instructions, Warnings

and

Caution sections.

Use your tool

properly and only for its intended use.

Safety symbols in this manual are used to flag possible dangers. The safety

symbols and their explanations require your full understanding. The safety warnings
do not by themselves eliminate any danger, nor are they substitute for proper
accident prevention measures.

This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey

a safety warning can result in serious injury to yourself or others. To reduce the risk of
injury, fire, or electric shock, always follow the safety precautions.

RULES FOR SAFE OPERATION

KNOW YOUR TOOL

To operate this tool, read this operating manual and all the labels affixed to the planer
carefully before using. Keep this manual available for future reference.

1
2
3
...
»

Содержание 54-6622-6










Отзывы:

Нет отзывов