MasterCraft 2007 MariStar страница 40 Скачать руководство пользователя

Страница: 40 / 81

Corrosion

2007 MasterCraft Owners Manual - Page 12-1

NOTE: Damage due to corrosion is not covered under warranty!

Galvanic Corrosion

Galvanic corrosion (electrolysis) to the

boat is the decomposition of metal due to the ef-

fects of electrolytic action. When two dissimilar

metals are immersed in a conductive ﬂ uid (salt

water), an electric current is produced, much like

the action of a battery. As the current ﬂ ows, it

takes with it tiny bits of the softer metal. If left un-

checked, a great deal of damage could occur.

If you operate in salt, polluted or brack-

ish waters, your boat should be equipped with a

transom-mounted zinc anode to prevent damage

to those metal parts coming in contact with the

water. The zinc is, by design, self-sacriﬁ cing. It

is slowly eroded away by electrolytic action and

requires periodic inspection for deterioration.

If the zinc shows extreme erosion, it must

be replaced to continue protection, or damage to

other metal parts may result.

Salt Water Corrosion

Your boat has been designed for operation in fresh water unless it has speciﬁ cally been designed as part of the

Saltwater Series. If you are operating a fresh-water model temporarily in salt, polluted or brackish water, you will need

to ﬂ ush with fresh water. The entire engine cooling system should be ﬂ ushed with fresh water for at least ten minutes

after each use in such waters.

Boats operated continuously in salt water should be equipped with the closed cooling system to preserve

engine life.

Marine Growth

If accelerated marine growth is a problem in your area, an anti-fouling bottom paint may be necessary to slow

growth while protecting your gel coat.

Before selecting a bottom paint, talk with other boaters and your MasterCraft dealer to determine the prod-

uct that works best in your area. Many local variables can affect the selection of paint. Be sure to follow the paint

manufacturer’s directions exactly.

Be sure that all fasteners you use are approved and rated for marine use. Most fasteners used on MasterCraft boats
are stainless steel or specially coated to resist corrosion.

Use of improper parts can cause component or engine failure, which may result in serious injury or death!

Содержание 2007 MariStar


















































































Результаты поиска

Содержание 2007 MariStar

Отзывы:

Похожие инструкции для 2007 MariStar

Бренды по названию

Популярные бренды

MasterCraft 2007 MariStar, Руководство пользователя

Результаты поиска

Содержание 2007 MariStar

Отзывы:

Похожие инструкции для 2007 MariStar

Бренды по названию

Популярные бренды