OPERA
TING INSTR
UCTIONS
18
5 U.S. GALLONS (18.9 L)
•
135 PSI (MAX) AIR COMPRESSOR 058
-
9315
-
2
4. Check and verify the motor
oil level in
the pump.
5. Close the tank drain valve (1). Plug
-
in
the power cord (2)
(fig L)
.
6. Set the pressure switch to the ON
position and allow the tank pressure to
build. Motor will stop when tank
pressure reaches cut
-
out pressure.
7. Turn the air pressure regulator knob
clockwise until desired pressure is
reached.
Shut down procedure
1. Set the pressure switch (1) to the OFF
position.
2. Unplug the power cord (2).
3. Reduce the pressure in the tank through
the outlet hose. Pulling the safety valve
ring (3) and keeping it open will also
reduce the pressure in the tank
(fig M)
.
MC-589315-21
fig L
1
2
MC-589315-22
1
3
fig M
2
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
•
Escaping air and moisture can propel debris that may cause eye injury.
Wear safety goggles when opening the drain valve.
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
To avoid personal injury, always shut off and unplug the unit, and relieve all
air pressure from the system before performing any service on the air
compressor.
•
Risk of unsafe operation. Unit cycles automatically when power is on. When
performing maintenance, you may be exposed to voltage sources,
compressed air or moving parts. Personal injuries can occur. Before
performing any maintenance or repair, disconnect power source from the
compressor and bleed out all air pressure.
