Master & Dynamic MW07 PLUS, Быстрый старт

Страница: 2 / 28

The first time you take both earphones out of their case they
will enter pairing mode.
STEP 1: Open the Bluetooth menu on your device.
STEP 2: Select M&D MW07 PLUS R.
STEP 3: When prompted by your device, confirm connection.
PAIRING
MULTI-FUNCTION
BUTTON
PULSING
INDICATOR
LIGHT
To manually activate pairing mode, hold down the multi-function button until
the indicator light starts pulsing/pairing tone is heard. NOTE: if you are
already connected to a device, remove the earphones from your ears to avoid
activating your voice assistant.
Dual microphones in each earphone provide the freedom to listen or talk with
just one earphone.
MW07 PLUS QUICKSTART CONTROLS
MULTI-FUNCTION
BUTTON 1X: PAUSE / PLAY
2X: SKIP FORWARD
3: SKIP BACK
VOICE ASSISTANT
HOLD MULTI-FUNCTION
BUTTON TO ACTIVATE
AMBIENT LISTENING MODE
HOLD VOL+ FOR ON/OFF
ACTIVE NOISE-CANCELLING
HOLD VOL- FOR ON/OFF
Full
Med
Low
CASE BATTERY
EARPHONE BATTERY
Case and earphones
recharge to 50% in 15 min,
100% in 40 minutes
For more information visit masterdynamic.com/support
FIT
Your earphones come with medium fit wings and medium ear tips
attached. For the most secure fit and best acoustics, choose the
ear tips that form a seal with your ear canal, and the fit wings that
comfortably fit under your ear ridge. To remove or attach the fit
wings you must first remove the ear tips.
Tilt the earphone forward
with the ear tip resting
lightly in your ear canal. Rotate the earphone down until
the ear tip forms a seal with
your ear canal and the fit wing
slips under your ear ridge.
EAR
RIDGE
EAR TIP OPTIONS
FIT WING OPTIONS
To insert your earphones follow these steps:
XS S M L XL
S M L NONE
VOL-
VOL+