Masimo O3 Regional Oximeter, Руководство оператора, Страница: 45 / 52

www.masimo.com 43 Masimo
Chapter 8: Service and Maintenance
Cleaning Procedure
The O3
®
Module should be cleaned at regular intervals or in accordance with hospital, local,
and/or governmental regulations.
See
Safety Information, Warnings and Cautions on page 9.
The O3
®
Module is a reusable instrument which is supplied non-sterile.
To clean the O3
®
Module:
•
The outer surface of the instrument can be cleaned with a soft cloth dampened
with a mild detergent and warm water solution.
•
Do not allow liquids to enter the interior of the instrument.
•
The outer surface of the instrument can also be wiped down using any of the
following solvents:
•
Cidex Plus (3.4% glutaraldehyde)
•
10% bleach solution
•
70% isopropyl alcohol solution
General Maintenance for O3
®
Module
Safety tests and internal adjustments should be done by qualified personnel only. Safety
checks should be performed at regular intervals or in accordance with hospital, as well as
local and governmental regulations.
The following is a checklist for the general maintenance of the O3
® Module:
•
Visually inspect equipment for functional or structural damage, including poor
seals, cracks, damaged springs, etc.
•
Visually inspect cables, connectors, and connector pins for signs of damage or
wear.
•
Visually inspect product identification labels to ensure they are clear and legible.
Service Instructions
O3
®
Module has no customer serviceable parts. Attempting to service O3
®
Module will void
the warranty. Safety tests and internal adjustments should be done by qualified personnel
only. See Sales & End-User License Agreement on page 45.
To contact Masimo, see
Contacting Masimo
on page 44.