16
17
D
C
A
B
G
H
I
F
E
J
K
V - Control system
Left handlebar control system
Dimmer switch
A
Press the button, using the switch allows
you to choose the distance of the headlights :
high or low.
High beam
Low beam
Right handlebar control system
Caution
When you are finished turning, the turn signals do not turn off automatically.
You have to press this button to stop them.
Horn Button
C
Turn the key switch to the ON position,
press the horn button and it will emit a
sound
Headlight flasher switch
D
The flasher can be used to signal its
presence.
Clutch grip
E
Allows the motor to be disengaged in order
to change gears.
.
Turn signal switch
B
Use the turn signals to turn left or right.
Operate the button to the left or to the right, the indicator will flash. Press the
switch again to stop the turn signal.
(R) Turn right
(L) Turn left
Electric starter button
F
Press this button to start the engine.
Caution
Make sure that the vehicle is always in
neutral position (N or 0) and always operate
the clutch grip before starting the engine
Engine shutdown switch
G
It is used to manually stop the motorcycle in
an emergency situation.
Position it on
to be able to start the
engine.
Front brake grip
H
To apply the front brake, gradually press the brake grip located on the right
handlebar. Since the motorcycle is equipped with hydraulic braking, the brake lever
should not be manipulated either sharply or roughly. Pressing the lever automatically
turns on the brake light.
Accelerator grip
I
It makes it possible to vary the speed of rotation of the motor. The acceleration is
done by making it turn towards you; deceleration, by releasing the handle.
Caution
Only use the emergency stop switch in an emergency situation.
Hazard warning lights
J
To activate the hazard lights, push the button to the left. The indicator and lights
will flash.
To remove them, push the button to the right.
Info button
K
Allows you to adjust the counter settings (see
page 13)
