Maserati Quattroporte, Руководство пользователя

Страница: 217 / 328

6
215
Driver Assistance Systems
Cruise Control - CC
The electronic Cruise Control (CC)
enables the driver to maintain the
desired vehicle speed without pressing
the accelerator pedal, reducing driving
fatigue on highways, especially long
trips, as the set speed is automatically
maintained. A firm press on the
accelerator pedal or the braking pedal
will temporarily deactivate the cruise
control function.
CAUTION!
The device can only be switched on at
speeds exceeding 30 km/h (18 mph)
and it switches off automatically when
the brake pedal or the accelerator
pedal is pressed.
WARNING!
The Cruise Control function must only
be activated when traffic and the
route permit a constant speed to be
maintained safely for a sufficiently
long distance.
Controls
The Cruise Control controls are located
on the left side of the steering wheel.
Control configuration depends on
which driver assist systems are installed
to the vehicle.
In the standard configuration there is
a specific button to enable and disable
the CC.
Standard Configuration
In the optional configuration, there
is no specific button to enable and
disable the CC, since driver uses the
ACC control buttons.
Optional Configuration
Control buttons have the following
functions:
Standard Configuration
ON/OFF button to en-
gage/disengage CC system.
Optional Configuration
Press ACC time gap button
and hold it down for 2
seconds to enable the CC
system.
Press ACC button to disable
the CC system.
Shared by All Configurations
Multifunction switch:
• Press up (indication RES +):
increase speed, set current
speed or resume previously
set speed when system is in
"cancelled" status;
• Pushed (indication CANC):
deletes the set speed;
• Press down (indication SET -
): set speed/decrease speed.
NOTE:
• The figures only show the Standard
Configuration.
• In order to ensure proper operation,
the CC system has been designed
(Continued)