Maserati MC20 2022, Руководство пользователя

Страница: 115 / 288

4
111
Instruments and Controls
In case of interruption, due to new
events, the visualization is anyway
displayed once events that caused the
interruption are terminated.
Trip Display
“Trip” is the default content displayed
on the left side contents area (see
“Controls to Set and Configure the
Instrument Cluster” in this section).
The trip area displays the following
parameters:
1.
Total odometer
2. Distance (*)
3. Elapsed time (*)
4. Average consumption (*)
5. Average speed (*).
(*) These values can be reset with a
long press of the MENU button on the
left multifunction lever.
• The “Elapsed time” 3 is shown in
hhh:mm format. The maximum
counter is 999:59. After that, the
counter will restart from 00:00.
• After a reset, or if the signal is not
available, the value of the related
items is replaced with a dash (“-“)
for each digit, except for the elapsed
time that will restart from 00:00.
Pedals and Gauges Display
“Pedals” is the default content
displayed on the right side contents
area (see “Controls to Set and
Configure the Instrument Cluster” in
this section).
Brake Accelerator Pedals
For brake (BRAKE) and accelerator
(GAS) pedals the instrument cluster
displays the graphic dynamic bars in
the right side area (see “Instrument
Cluster Overview” and “Controls to Set
and Configure the Instrument Cluster).
The filling of the dynamic sectors
indicates the current pedal position.
If the user press accelerator pedal and
brake pedal at the same time, the bars
will show both gas and brake sectors
filled.
When the signal is not available, the
graphic shall be greyed-out.
In the WET drive mode or in full map
view only the brake and gas positions
is displayed in dynamic arc sectors (see
example in picture).
Boost and Torque
“Gauges” is a content that can be
displayed on the right side contents
area (see “Controls to Set and