MAS STELLA i.MX6, Руководство по оборудованию

Страница: 24 / 41

Connector J30 Camera Link and MIPI Input
•
STRIP_20x2 PICH 2mm
•
Part Number: SAMTEC ST-MV-SMD-P2-20X2-TMMH STRIP_20x2 MALE
PIN NAME DESCRIPTION
1 3V3 3,3V POWER SUPPLY
2 1V8 1,8V POWER SUPPLY
3 3V3 3,3V POWER SUPPLY
4 1V8 1,8V POWER SUPPLY
5 GND GROUND SIGNAL
6 GND GROUND SIGNAL
7 2V8 2,8V POWER SUPPLY
8 GND GROUND SIGNAL
9 2V5 2,5V POWER SUPPLY
10 CSI_D1P CSI POSITIVE SERIAL DATA 1
11 1V5 1,5V POWER SUPPLY
12 CSI_D1M CSI NEGATIVE SERIAL DATA 1
13 GPIO_0_CLKO CMOS 3V3 CLOCK SIGNAL FROM PROCESSOR
14 GND GROUND SIGNAL
15 CSI_GPIO7_11 CPU GPIO7_11
16 CSI_CLK0P CSI POSITIVE SERIAL CLOCK
17 CSI_MCLK CMOS 1V8 CLOCK SIGNAL FROM PROCESSOR
18 CSI_CLK0M CSI NEGATIVE SERIAL CLOCK
19 GND GROUND SIGNAL
20 GND GROUND SIGNAL
21 CSI_RST_B CSI RESET SIGNAL
22 CSI_D0P CSI POSITIVE SERIAL DATA 0
23 CSI_GPIO3_28 PROCESSOR GPIO3_28
24 CSI_D0M CSI NEGATIVE SERIAL DATA 0
25 GND GROUND SIGNAL
26 GND GROUND SIGNAL
27 NC NOT CONNECTED
28 CSI_D2M CSI NEGATIVE SERIAL DATA 2
29 NC NOT CONNECTED
30 CSI_D2P CSI POSITIVE SERIAL DATA 2
31 GND GROUND SIGNAL
Pag. 24 of 41 STELLA i.MX6
Hardware Manual
Rev.1.0