Страница 1: ... instructions ...
Страница 2: ... plastic frame below space bar Remove styrofoam packing but do not throw away 3 Open cover and remove cardboard packing and also rubber band on ribbon spools 4 Remove T shaped cardboard packings wedged underneath carriage by lifting carriage release levers Illustration A 5 Remove rubber band on line space ratchet lever marxwriter ...
Страница 3: ... of paper into the machine the paper release bar should he pulled towards the user and the paper should be pushed down into tht carriage unti I the top of the paper extends past the ribbon 6 PAPER BAIL BAR This bar holds the paper in the proper position so that typing will be visible and the bar should he I ifted when inserting the paper or making corrections 7 CARRIAGE 8 CARRIAGE KNOBS These knob...
Страница 4: ...bove sketches and proceed as follows a First make sure the felt washer is on the bas e of each spool shaft b Place the spool on the shaft with the grooved holes toward the bottom making sure that the spool i s properly seated on the shaft c Place r ubber knob on the top of each shaft to hold spool in place d Place the ribbon across the backside of the ribbon guide next to the carriage roll and the...
