Marvell
®
ARMADA™ 16x Plug Computer Development Kit Users Manual
Doc. No. MV-S400320-00 Rev. -
Copyright © 2010 Marvell
Page 18
December 2010
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Enter “help” to get a list of U-Boot commands. Enter “boot” to load the kernel and start Linux.
3.2
Remote Access with Secure Shell (SSH)
Secure Shell (SSH) can be used to access the gplugD when it is connected to a network. The steps
that follow assume either (a) that the Plug has been reconfigured to use a static IP address or (b)
that its dynamically assigned IP address is known. Any client that supports Version 2 of the SSH
protocol can be used, which makes TeraTerm a particularly convenient choice for this example.
1.
Select “New connection…” from the File menu, enter the Plug’s IP address, select the SSH radio
button, chose “SSH2” from the SSH version drop-down menu, and click “OK” (see Figure 6).
2.
When connecting to any machine not explicitly listed in its “
hosts”
file, the SSH client displays a
warning message as shown in Figure 7:
Figure 6: TeraTerm SSH Setup
Figure 7: SSH Unrecognized Host Warning Message
