NOTE:
If the engine does not start after four pulls, use
the cold start procedure.
3. If the Engine Does not Start.
a. If you did not move the choke lever to the
"FULL OPEN"
position quickly enough after the
engine began to fire, the combustion chamber
has flooded.
b. Remove the spark plug wire (Ref. 7).
c. Unscrew and dry off the spark plug.
d. Set the ignition switch to "O".
e. Open the throttle fully .
f. Pull the starter rope several times to clear the
combustion chamber
g. Refit the spark plug and connect the spark plug
wire.
h. Set the ignition switch to "I".
i. Set the choke lever to
"FULL OPEN".
j. Now start the engine.
11
OPERATION
B. STOPPING:
1. Return the throttle to the
"IDLE"
position and let
the engine run for 2 or 3 minutes until it has
cooled down.
2. Slide the ignition switch (Ref.1) to the "O"
position.
AwARNING
Reread the Safety Precautions relating
to "Operation" on Page 3.