COOLING UNIT (EVAPORATOR)
1. Evaporator
2. A/C Evaporator thermistor
(Evaporator temperature sensor)
3. Expansion valve
4. Evaporator case
Removal
1) Disconnect the negative (–) cable at battery.
2) Recover refrigerant by using recovery and recycling equipment
(1). Be sure to follow the instruction manual for the equipment.
The amount of compressor oil removed must be measured and
the same amount added to the system.
3) Open glove box door and remove glove box upper panel by re-
moving mounting screws (1).
4) Remove instrument panel mounting screws (2) and loosen
instrument panel mounting screw (4).
5) Remove ECM from vehicle body.
6) Remove air inlet box (1) from cooling unit (2).
7) Remove connecting stay (3) (4) from heater and cooling unit.
8) Disconnect evaporator thermistor wire couplers (5) from ve-
hicle harness.
1B-28
AIR CONDITIONING (OPTIONAL)
SH410
Содержание Zen
Страница 2: ......
Страница 233: ...6E1 6 ENGINE AND EMISSION CONTROL SYSTEM SH410 ...
Страница 358: ... SH410 Prepared by Overseas Service Department 1st Ed January 2000 Printing January 2000 356 ...