MARUTI SUZUKI Vitara Brezza, Руководство пользователя

Страница: 77 / 366

2-58
BEFORE DRIVING
82PH0-74E
Full blast warning sensitivity
of the shock sensor “S4”
• S4-L00: Disable the full blast warning
• S4-L01 to L15:
Adjust the full blast warning
sensitivity of shock sensor
(Lowest sensitivity level is L01
and highest is L15, and default
setting is L09)
Initialization setting “dEFAUL-on”
• dEFAUL-on: Initialize all settings
76MH0017
NOTE:
• As shown in the above illustration,
“ ” on the display indicates the cur-
rent setting.
• To go back to the higher level display
during operation, turn the indicator
selector knob (2) to display “bACK” or
“-bAC” and then push the indicator
selector knob (2).
4) To exit the setting mode, switch the dis-
play to show “End” and then push the
indicator selector knob (2).
Warning and Indicator Lights
Brake System Warning Light
65D477
Three different types of operations exist
depending on the vehicle’s specification.
1) The light comes on briefly when the
ignition switch is turned to the “ON”
position or the engine switch is pressed
to change the ignition mode to “ON”.
2) The light comes on when the parking
brake is engaged with the ignition
switch in the “ON” position or the igni-
tion mode “ON”.
3) The light comes on when under either
or both of above two conditions.
The light also comes on when the fluid in
the brake fluid reservoir falls below the
specified level.
The light should go out after starting the
engine and fully releasing the parking
brake, if the fluid level in the brake fluid
reservoir is adequate.
If your vehicle is equipped with the ABS,
the brake system warning light also comes
on together with the ABS warning light
when the rear brake force control function
(proportioning valve function) of the ABS
system fails.
If the brake system warning light comes on
while you are driving the vehicle, it may
mean that there is something wrong with
the vehicle’s brake system. If this happens,
you should:
1) Pull off the road and stop carefully.
2) Test the brakes by carefully starting and
stopping at the side of the road.
– If you determine that it is safe, drive
carefully at low speed to the nearest
dealer for repairs, or
– Have the vehicle towed to the nearest
dealer for repairs.
EXAMPLE
WARNING
Remember that stopping distance
may be longer, you may have to push
harder on the pedal, and the pedal
may go down farther than normal.