background image

Maruson | Tacoma 1KVA-3KVA User Manual 

 

33 

10.

 

WARRANTY 

The 1KVA / 2KVA / 3KVA Tacoma (individually and collectively, the “Product”) 
includes limited warranties Maruson Technology Corporation (referred to herein 
as “Maruson”) offers for customers in the United States and Canada who register 
their product within fifteen (15) days of the invoice date. These limited warranties 
are only for the original end-

user (“Original Purchaser”). Please retain a copy of 

your receipt as proof of purchase. All Connected Equipment Warranty claims 
must be made within ten (10) days of occurrence. If you need to file a claim, fill 
out the RMA form online from the Maruson website first. Terms and conditions 
apply. Visit our website for details. To register your product, go to 
www.MarusonUSA.com. 

Maruson warrants the Original Purchaser of this Product that the product is free 
from defects in materials and workmanship under normal use and service for 
which the product was designed for a period of two (2) years for Limited Product 
and two (2) years for Limited Battery Warranty. Additionally, this Product 
includes two (2) years Limited Connected Equipment Warranty for customers 
located in the US or Canada with Product Registration. The limited warranties 
start date is based on the date of purchase. If, in the opinion of Maruson, the 
UPS or battery is defective and defective within the scope of this warranty, 
Maruson’s sole obligation will be to repair or replace the defective UPS or 
battery. No salesperson, employee, or agent of Maruson is authorized to add to 
or vary the terms of the warranties. By using the Product, you agree to the terms 
of the Limited Warranty. The duration of warranty coverage does not pause, 
restart, or extend if the Product is with Maruson or any of its dealers for 
evaluation, servicing, repairs, or if a replacement part or unit is provided.   

The Connected Equipment Warranty is a Limited Warranty, subject to the 
limitations and exclusions set forth herein and only covers claims from damage 
of any properly connected equipment due to failed AC protection circuitry from a 
transient surge and only available to customers who purchase and use the UPS 
in the US or Canada. Furthermore, the Connected Equipment Warranty is not 
deemed “first dollar” coverage. It is secondary. If you have any other source of 
payment for your loss, such as insurance, another warranty, or an extended 
warranty or purchase protection plan (“Primary Coverage”), Maruson will pay 
only to the to the extent that the Primary Coverage does not cover the loss. 
Maruson’s obligation is reduced by any amounts that you are entitled to recover 
from the Primary Coverage, whether or not you make a claim for recovery under 
the Connected Equipment Warranty. The cumulative limit to be paid by Maruson 
under this warranty is up to (one hundred United States Dollars) USD 100.00.   

Maruson will spend to repair or replace the damaged connected equipment, at 
Maruson’s option, an amount equal to the fair market value of the damaged 
equipment or the original purchase price of the equipment, whichever is less. 
The fair market value of the equipment shall be the current value for the 

Содержание TAC-LV1K







































Отзывы: