Martin Cyclo Directional IP65, Руководство пользователя

Страница: 30 / 48

30 Cyclo IP65 Directional user manual
A quick reference table covering DIP switch functions is also provided on
the back cover of this manual.
Stand-alone operation settings
Activating tubes
DIP switch pins 1 to 3 (03 models) or 1 to 4 (04 models) activate tubes in the
stand-alone program.
Setting program speed
Combinations of DIP switch pins 5 and 6 allow one of four different speeds
to be set.
Note that the speed of color changes affects tube life (see “ Fluorescent tube
lifetimes and performance ” on page 27).
Fading between colors
If DIP switch pin 7 is set to OFF (blackout fading), colors fade to almost
blackout before the next color fades in.
If DIP switch pin 7 is set to ON (crossfading), color fading overlaps. If two or
more colors are active, one color fades in while another is fading out, giving
a color mixing effect. For example, if red and blue are activated and
crossfading is selected, colors will crossfade from red through purple to
blue, then back through purple to red in a continuous cycle (see example).
Red
Blue
100%
Time
Purple Blue Blue
100% Blue 100% Blue
0% Red 0% Red
50% Blue 50% Blue
50% Red 50% Red
0% Blue 0% Blue
100% Red 100% Red Red
0%
50%
Example: crossfading between red and blue
www.carlosmendoza.com.mx