Martin Alien LED Downlight, Руководство пользователя, Страница: 3 / 32

Safety Information
The following symbols are used to identify important safety information on the product and in this
manual:
Warning! This product is for professional use only. It is not for household use. This product
presents risks of injury or death due to fire hazards, electric shock and falls. Read this manual
before installing, powering or servicing the fixture, follow the safety precautions listed below and
observe all warnings in this manual and printed on the fixture. Install and operate the fixture only
as described in this manual and in accordance with local laws and regulations. Refer any
operation not described in this manual to a qualified technician.
If you have questions about how to operate the fixture safely, please contact your Martin supplier
or call the Martin 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180.
PROTECTION FROM ELECTRIC SHOCK
• Shut down power to the entire installation at the main power distribution board and lock out
power (by removing the power distribution fuse for example) before carrying out any installation
or maintenance work.
• Disconnect the devices from AC power before removing or installing any cover or part and
when not in use for an extended period.
• Connect the driver unit electrically to ground (earth).
• Do not connect the driver unit to an AC power source outside the voltage ranges and frequency
specified in this manual
• Before applying power, check that the voltage selector switch on the driver unit is set to match
the local power source voltage.
• Use only a source of AC power that complies with local building and electrical codes and has
both overload and ground-fault (earth-fault) protection.
• Before using the devices, check that all power distribution equipment and cables are in perfect
condition, are rated for the current requirements of all connected devices and are of suitable
type for the location.
• Isolate the devices from power immediately if any cable or other component is damaged,
cracked or deformed. Do not reapply power until repairs have been completed.
• Do not expose any part of a driver unit or transformer to water or any other fluid. Install these
devices in dry locations only.
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing this
product.
Warning!
Safety hazard.
Risk of severe
injury or death.
Warning!
Hazardous
voltage. Risk of
lethal or severe
electric shock.
Warning!
Fire hazard.
Warning!
Refer to user
manual.