10 TECHNICAL
SPECIFICATIONS
F215
TYPE
Two-way passive, reflex enclosure with dedicated
low frequency driver
FREQUENCY RESPONSE(1)
45Hz-17kHz ±3db
DRIVERS
15'' (380mm) /3'' (75mm) coil bass driver
15'' (380mm) /3'' (75mm) coil bass-mid driver
1.4'' (35mm) exit HF compression driver
RATED POWER (2)
800W AES, 3200W peak
SENSITIVITY (3)
101dB 1 Watt/1 metre
MAXIMUM SPL (4)
128dB continuous, 134dB peak
RECOMMENDED AMPLIFIER
400-1200W (into 4 ohms)
DISPERSION (-6dB)
80˚ horizontal x 50˚ vertical
NOMINAL IMPEDANCE
4 ohms
CROSSOVER
1.3kHz passive
ENCLOSURE
165 litre (5.8cu foot), multi-laminate birch ply
FINISH
Textured black paint
PROTECTIVE GRILLE
Black perforated steel
CONNECTORS
2 x Neutrik NL4
FITTINGS
12 x M10 threaded inserts
4 x 4'' (100mm) castors
DIMENSIONS
(W) 561mm x (H) 1066mm x (D) 496mm
(W) 22.1ins x (H) 42ins x (D) 19.5ins
WEIGHT
62kg (137 lbs)
SHIPPING DIMENSIONS
(W) 640mm x (H) 1090mm x (D) 560mm
(W) 25.2ins x (H)43ins x (D) 22ins
SHIPPING WEIGHT
68kg (149.8 lbs)
Notes
1. Measured on-axis in half space at 2 metres, then referred to 1 metre.
2. AES Standard ANSI S4.26-1984.
3. Measured in half space conditions at 2 metres with 1 watt input, using band limited pink noise,
then referred to 1 metre.
4. Measured in half space conditions at 2 metres using band limited pink noise, then
referred to 1 metre.
Due to our policy of continuous improvement all specifications are subject
to change without notice.
Martin Audio – Blackline F215
E
NGLISH
8
CONTENTS
<
>
GUIDES
