Page 2 of 2
Note:
Turn the power off (unplug from the wall outlet) before replacing the bulb. Make sure the bulb has sufficient time to cool
down.
Assembly Instruction:
Step1. Unpack and place all parts on a surface or floor.
Step2. Insert and thread the Tube (E) into the Base (F) by turning clockwise until secure.
Step3. Insert and thread the Socket Assembly (D) into the Tube (E) by turning clockwise until secure.
NOTE:
Carefully pull out any excess power cord through Base (F) while assembling to prevent the cord from twisting.
Step4. Install light bulb into socket.
Step5. Pinch and insert the Harp (C) into the harp fittings on the Socket Assembly (D). Slide the caps on the Harp (C)
over the fittings on the Socket Assembly (D) to secure.
Step6. Remove the Finial (A) from the Harp (C), place the Shade (B) on the Harp (C) and secure with Finial (A).
Step7. Insert the plug into an electrical outlet.
Step8. Use the rotary switch on the Socket Assembly (D) to turn the lamp ON and OFF.
Care instructions:
• Wipe with soft dry cloth only
• Always avoid the use of harsh chemicals or abrasive as they may damage to the finish.
Thank you for your purchase
