© 2017 by Snow Joe
®
, LLC
Distributed exclusively by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
Model MTS-CBF1
Form No. SJ-MTS-CBF1-880E-M
COPPER BIRD FEEDER
OPERATOR’S MANUAL
This Copper Bird Feeder is a beautiful addition to your outdoor décor. The feeder also acts as
a shelter with a luxurious copper cover. The easy-to-clean feeder is equipped with four feeding
ports and the lipped feeding tray with drain holes prevents waste and keeps feed dry.
INSTRUCTIONS FOR USE + CARE:
FILLING: To fill bird feeder with seed, remove the ring handle by turning it counter clockwise.
With the ring handle removed, lift the copper cover off of the center screw.
Fill feeder tube with seed. Do not fill beyond the black rim at the top of the feeder tube.
Replace the copper cover onto the center screw and secure with the ring handle. Refill as needed.
CLEANING: Remove all seed and disassemble feeder before cleaning. Wash regularly with warm
water and let dry completely before refilling.
If mold or debris has accumulated, mix nine parts water with one part bleach and clean thoroughly.
Rinse well, dry completely and refill with fresh seed.
COPPER CARE: To restore the brilliant finish to your copper feeder, polish well with a copper
cleaner/varnish. Seal copper with a clear lacquer to prevent additional wear.
If you have any questions or comments, please call the Snow Joe
®
+ Sun Joe
®
Customer Service
department at: 1-866-SNOWJOE (1-866-766-9563).
Ring handle
Copper cover
Center screw
Feeder tube
Seed tray
Black rim