CEILING FAN REMOTE CONTROLLER OPERATION AND
INSTALLATION INSTRUCTIONS
IMPORTANT POINTS TO REMEMBER:
Read and save these instructions.
Please note that all fixed wiring appliances should be installed by a qualified electrician.
The supply to the remote control receiver should be connected through a mains switch,
i.e
.
existing wall switch.
Disconnect from power supply at wall switch before working on remote control receiver or
ceiling fan.
Install receiver into the ceiling fan canopy of the fan to ensure proper protection.
This unit is to be used for the control of ceiling fan and in a AC230/240V 50Hz power supply
only.
Do not install in damp locations or immerse into water. (For indoor use only.)
Do not pull on or cut
electrical cord
shorter.
Please d
ispose of used batteries properly
and
keep batteries
out of reach of children.
INSTALLATION INSTRUCTIONS
1.
Ceiling fan must be set at HIGH speed and light kit (If
fitted with a light kit
) at
"
ON
"
position
by
switching the switch to on position
after installation
.
2.
Once the connection has been made, the receiver inserts into the drop rod hanging bracket.
The canopy comes up to cover the receiver and bracket.
3.
Please make sure
the antenna
wire has been
safely
folded
inside the canopy
cover before
final
assembly.
IMPORTANT
Model: MPLCDS
In-home
warranty
Please keep this instruction information on how to operate your remote.
R
ECEIVER WIRING DIAGRAM
:
RECIEVER INSTALLATION DIAGRAM:
