MT8495 User’s Manual V1.0
___________________________________________________________________________________
39
Raw
UNICODE
6.7 RF Message
Read Fail (RF) message is the message sent from MT8495 to the host device
in the case of scanning failure.
6.7.1 Enable/Disable RF Message
Enable RF Message
Disable RF Message*
6.7.2 Set RF Message
Set RF Message
The RF message can be up to 15 bytes of data, with each data converted into
two-digit hex value during configuration. Please refer to Appendix C for ASCII
table and corresponding hex value.
Example: to set RF Message as ‘CODE’
1. Convert “CODE” into Hex equivalent as 43, 4F, 44, 45
2. Scan
Set RF Message