MT8495 User’s Manual V1.0
___________________________________________________________________________________
23
Enable Trigger
Disable Trigger
Command Response*
Command Response
3.2.2 LED Timeout
Please refer to
3.1.2 LED Timeout
for configuration barcodes.
3.3 Continuous Mode
In continuous mode, MT8495 keeps scanning barcodes continuously. By
default, after a successful scan, MT8495 enters a Scan Interval of 1000ms.
During scanning, keeping the trigger pin low for 50ms will cause the scanning
to pause. Likewise, during pause, keeping the trigger pin low for 50ms will
restart the scanning.
Continuous Mode*
3.3.1 Trigger Control
Scanning below configuration barcodes will allow/prohibit trigger control over
pause/restart scanning in continuous mode.
Trigger Control On*
Trigger Control Off
3.3.2 LED Timeout
Please refer to
3.1.2 LED Timeout
for configuration barcodes.
