Marson MT580W, Руководство пользователя

Страница: 146 / 154

144
l. Program the Code Page
Example: Set the code page to Windows 1251 (Cyrillic)
1. Scan the Enter Setup barcode.
2. Scan the Set the Code Page barcode. (See the
“Code Page”
section in Chapter 2)
3. Scan the numeric barcode
“1”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
m. Program the Length Range (Maximum/Minimum Lengths) for a Symbology
Note: If minimum length is set to be greater than maximum length, the engine only decodes barcodes with
either the minimum or maximum length. If you only want to read barcodes with a specific length, set both
minimum and maximum lengths to be that desired length.
Example: Set the engine to decode Code 128 barcodes containing between 8 and 12 characters
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode. (See the
“Set Length Range for Code 128”
section
in Chapter 7)
3. Scan the numeric barcode
“8”.
4. Scan the Save barcode.
5. Scan the Set the Maximum Length barcode. (See the
“Set Length Range for Code 128”
section
in Chapter 7)
6. Scan the numeric barcodes
“1” and “2”.
7. Scan the Save barcode.
8. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)