Marson Integra-Fuse M39075, Руководство по эксплуатации, Страница: 2 / 7

2
WARNING:
ALWAYS WEAR SAFETY GLASSES
WHEN OPERATING AND PERFORMING MAINTENANCE ON TOOL
AIR FEED
Use only compressed air. Check airline for damage from humidity &
contaminants. In order to protect the tool from premature wear, we
recommend the use of air regulator and moisture filter
Recommended Air Pressure is 85 – 95 psi
Air hose connection thread size is ¼ ” NPT.
WARNING:
Do not use air supply greater than recommended or tool may be
damaged or burst.
Operation:
1. Attach tool to air supply.
2. As shown below, OPEN the shut off valve.
3. Press and hold trigger, to change nosepiece to correct size and then release trigger.
4. If attached, remove mandrel collection bottle and turn vacuum valve assemble to the on position
to start vacuum system. Reattach mandrel collection bottle.
5. Insert rivet into tool and squeeze trigger to set. Once rivet is set, release trigger and spent
mandrel will be discharged into the mandrel collection bottle when vacuum system is on.
VVVVV
1
Vacuum Control knob
Mandrel Collection
Bottle
2