Marsh PatrionPlus, Техническое руководство

Страница: 99 / 269

Operations
29669/02080 Rev AG
4-27
Selecting the Bold Option
VJ Printheads
Note: Bold is only available for 7 DOT, 16 DOT, and 16 Dot VJ fonts.
You can apply bold to a new element or to an existing element. To apply
bold to an existing element, select and highlight the element before
choosing bold.
HR Series Printheads
Note: If you are using Custom Fonts with HR Series printheads, you must
select Bold in addition to the font layout (16 DOT, 7 DOT, 5 DOT, 4 DOT). If you
do not select bold, the standard PatrionPlus font will be used.
If you are using HR Series printheads, you cannot apply the bold option to text
to achieve darker print.
1) At the message screen, press Fonts.
2) Select Bold, then press Enter. A check mark indicates that the option
has been selected.
3) Press Esc. The bold feature is applied.
Adding or Editing Text
1) Select a font. (See Page 4-26.)
2) At the message screen, place the cursor in the message where the text
will be added, or select and highlight the text you want to edit.
3) Enter your text. If you make a mistake, press the delete key to erase the
text.
Note: Do not use the space bar on the keypad to position elements in the
message. Use the arrow keys to position elements. (See “Moving an
Element” on page 4-52.)