manualshive.com logo in svg

Marsh PatrionPlus, Техническое руководство

Поделиться
Скачать
Marsh PatrionPlus Скачать руководство пользователя страница 36

Specifications

2-30

29669/02012 Rev AF

IndependentVJ Printhead Kit 
(Optional)

Allows a  VJ7 or VJ16 Series printhead to print without being connected to a 
controller.

Messages are created and the print command is sent with the controller 
connected to the printhead. Once printing has started, the controller can be 
disconnected from the printhead, and the printhead continues to print the 
message. Multiple independent printheads can be used.

Time, Date, and Count functions cannot be used with an independent 
printhead.

Kit includes a photocell board with internal photocells.

ADS Ink System

The ADS ink system is capable of supplying ink for a maximum of eight 
lines of print, using any combination of VJ7 and VJ16 Series printheads. The 
ink system can withstand harsh environments and works well with 
high-speed applications.

Driven by compressed air:

• Minimum volume and pressure: 1 cfm at 25 psi
• Maximum pressure: 150 psi
• Pressure switch set to cycle on/off at 100 psi +/- 15 psi

Ink Containers

1-quart (0.9 L) ink bottle (disposable)

5-gallon (19 L) ink container (disposable)

5-gallon (19 L) waste-free ink container (reusable)

15-gallon (57 L) ink drum (disposable)

50-gallon (189 L) ink drum (disposable)

250-gallon (946 L) waste free ink tank (reusable)

Series 2000 Ink System

One Series 2000 ink system is required for each HR Series printhead. Does 
not require compressed air. 

Mounts on the same bracketry as the HR Series printheads.

Ink Container

16.9 oz (500 ml) ink bottle

Low Ink Beacon (Optional)

Flashes red if your ink system reaches a low-ink state. (See Figure 2A.)

Mounts to a floor stand, flex stand, or any flat surface.

Ink Bottle Adapter Kit 
(Optional)

Allows the use of 8 oz (237 mL) Unicorn porous cartridge inks and solvent 
with VJ7 and VJ16 Series printheads.

Includes bracketry for installation on any flat surface and a connector 
assembly to connect the printhead to the ink container.

Содержание PatrionPlus














































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды