manualshive.com logo in svg

Marsh PatrionPlus, Техническое руководство

Поделиться
Скачать
Marsh PatrionPlus Скачать руководство пользователя страница 115

Operations

29669/02080 Rev AG

4-43

Adding a Bar Code

See “Bar Codes” on page 4-59 for information on adding a bar code into a 
message.

Print Preview

Note: Print Preview is not available if you are using VJ only software.

At the Print Preview screen you can view the placement of elements in a 
message and reposition elements that will be printed with HR Series 
printheads. Elements that will be printed with VJ printheads can only be 
repositioned at the message screen. The Print Preview screen does not show 
the actual elements, but displays outlines to show element placement.

Note: Make sure no elements are selected in the message screen.

1) From the message screen, press Messages.

2) Highlight Print Preview, then press Enter. The Print Preview screen is 

displayed.

3)  Press HR120, HR300, or VJ (depending on the type of printhead you 

are using) to view placement of elements.

VJ Printheads

Press OK to return to the message screen, and reposition any elements 
if necessary.

HR Printheads

a. Use the tab key to select any element that needs to be repositioned. 

The element will be turn solid black when it is selected.

b. Using the arrow keys, move the selected element left or right. You 

cannot move elements up or down. Note there is no undo function.

c. Press OK to return to the message screen.

4) Save your message.

Overlapped
element that
needs to be
repositioned.

Содержание PatrionPlus














































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды