manualshive.com logo in svg

Marsh PatrionPlus, Техническое руководство

Поделиться
Скачать
Marsh PatrionPlus Скачать руководство пользователя страница 107

Operations

29669/02080 Rev AG

4-35

Incrementing Count

1) Highlight Incrementing, then press Enter. The Incrementing Count 

screen is displayed.

2) Enter the Start At and Maximum count numbers (up to nine digits).

3) Press Options.

4) Select Reset or Prompt, then press Enter. A check mark indicates the 

option has been selected.

5) Press Options again to return to the incrementing count screen.

6) Press Add to Message to add the element to your message.

Option

Description

Reset

Resets the incrementing count to the original Start At number every 
time the message is selected to print.

Prompt

The system asks you if you want to reset the incrementing count 
before printing the message.

Содержание PatrionPlus














































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды