marsden M-110 Скачать руководство пользователя страница 4

 
Safety Instructions 

 

Before putting the device into use, please read with care the information given in this user manual, which 
contains important instructions for proper installation, use and maintenance of the device. 
 
Marsden/the manufacturer shall not be liable for damages arising from failure to heed the following 
instructions: 
 

 

When using electrical components under increased safety requirements, always comply with 
appropriate regulations. 

 

Inappropriate installation/use will render the warranty null and void. 

 

Ensure the voltage marked on the power supply unit matches your mains supply. 

 

This device is designed for use indoors. 

 

Observe the permissible ambient temperatures for use. 

 

The device meets the requirements for electromagnetic capability. Do not exceed the maximum 
values specified in the applicable standards. 

 

Batteries should be kept away from small children. If swallowed, promptly seek medical assistance. 

 
If you have any problems, contact Marsden/your local dealer/your service partner. 
 
 

Cleaning 

 

 

We recommend using alcohol-based wipes or similar when cleaning the scale. 

 

Please do not use corrosive liquids, large amounts of water or high-pressure washers. 

 

Always disconnect the scale from the mains power supply before cleaning. 

 
 

Maintenance 

 

 

The scale does not require any routine maintenance. However, we recommend checking the 
scale’s accuracy at regular intervals. If any inaccuracies occur, please contact your local dealer or 
service partner. 

 
 

Disposing of the Scale 

 

 

This product should not be treated as regular household waste, but should be handed in 
to an electrical/electronic equipment recycling center. 

 

You can obtain further details from your local council, your municipal waste disposal 
company or from where you purchased the product. 

 
 

Intended use 

 

 

This scale is intended for use to determine the weight of patients, supported by 

professional personnel and in rooms intended for carrying out healthcare. The weighing 
value can be read after a stable weighing value has been obtained. Before use, the scale 

must be checked by an authorised person to ensure it's in a suitable condition. 

 

Page 4

Содержание M-110

























Отзывы: