marsden M-110 Скачать руководство пользователя страница 19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Radiated RF IEC 

61000-4-3  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 V/m 80MHz to 2,7 

GHz  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 V/m   

distance in metres (m). 

 

 

Field strengths from fixed RF 

transmitters, as determined by 

an electromagnetic site survey

a

should be less than the 

compliance level in each 

frequency range

b

 

Interference may occur in the 

vicinity of equipment marked 

with the following symbol:   

 

 

 

 

 

 

NOTE1    At 80 MHz and 800 MHz, the higher frequency range applies. 

NOTE2    These guidelines may not apply in all situations. Electromagnetic propagation is affected 

by absorption and reflection from structures, objects and people.   
a    Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) 

telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV 

broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic 

environment due to fixed RF transmitters, an electromagnetic site survey should be considered. 

If the measured field strength in the location in which the MEDICAL SCALE M-110 is used 

exceeds the applicable RF compliance level above, the MEDICAL SCALE M-110 should be 

observed to verify normal operation. If abnormal performance is observed, additional measures 

my be necessary, such as re-orienting or relocating the MEDICAL SCALE M-110.   

b    Over the frequency range 150 kHz to 80 MHz, field strengths should be les than 3 V/m.   
 

 

 
 
 
 
 
 
 
 
 
 
 

 

Page 19

Содержание M-110

























Отзывы: