SOLO-NX
INSTALLATION MANUAL
Page 29
10.3
STATE OF THE CREDIT FOR THE PREPAID CARD
By
sending this command to SOLO-NX you receive SMS message with Credit amount on your
prepaid SIM card:
;
PCCX;
Where X is the number of programmed prepaid card provider.
10.4
STATE OF THE OUTPUTS (PORC)
By sending this command to SOLO-NX you receive SMS message with current outputs state.
;PORC;
10.5
MANUAL GSM MODULE RESTART (MRES)
By sending this command to SOLO-NX shuts down GSM module and after a few second it
switches the power of the GSM module ON again. The unit reboots all parameters from the SIM
card.
;MRES;
10.6
RECEIVE STATUS OF INPUTS (INS)
By sending this command to SOLO-NX you receive SMS message with current input state.
;INS;
10.7
RECEIVE SOLO-NX LOG
By sending this command to SOLO-NX you receive SMS message with log on SOLO-NX device.
;PLOG;
NOTE
User can use ;PLOG=x,y; to define the number of logs to be printed.
x = start event
y = end event
Example
;PLOG=1, 30; Prints first 30 log events
