Marq LFM1, Быстрый старт

Страница: 1 / 2

Quickstart Guide
Box
Contents
LFM1, (2) AAA Batteries, Quickstart Guide
Operation
Before using LFM1, install 2 AAA batteries into the small box inside
the headband.
The controls for LFM1’s lights are on the small box inside the
headband:
•
To power LFM1 on / off, set the power switch to On / Off .
•
To adjust how sensitive the sound-reactive lights are, adjust
the dial.
o
When set to Min , the lights will react only to louder sounds.
o
When set to Max , the lights will react even to quieter sounds.
To wash the mask, first remove the small box from inside the
headband and gently pull the wire connectors apart. Then wash
the mask by hand in water for
no more than 30 minutes . Before
reconnecting the small box, make sure the mask and its wire
connectors are completely dry.
During use, if the lights are lighting up in the opposite direction,
remove the small box from inside the headband, gently pull the
wire connectors apart, flip one of the connectors over, and
reconnect them.
Support
For the latest information about this product (documentation,
technical specifications, system requirements, compatibility
information, etc.) and product registration, visit
marqlighting.com .
For additional product support, visit marqlighting.com / support .
For warranty information, visit marqlighting.com / warranty .
Contact
World Headquarters:
inMusic Brands
200 Scenic View Drive
Cumberland, RI 02864
USA
Phone:
401-658-5764 (USA)
Fax:
401-658-3640 (USA)
Manual Version 1.0