marposs M1 Star MBG, Инструкция по эксплуатации

Страница: 33 / 58

33
OPTIONAL ACCESSORIES
4
4.3.2 ASSEMBLY OF NOSEPIECES DEPTH STOPS
This model is directly fitted on the outside diameter of the nosepiece and attached to it
(see Fig. 1). It is adjusted to the diameter of the nosepiece.
1. Insert the depth stop in the nosepiece and set it at the required height A; this value
varies according to the depth in which the measurement needs to be detected (see
Fig. 1). To define the correct position it is sufficient to add “A” to “C” (distance between
the axis of the contacts and the top of the nosepiece), by means of a slider gauge
(see Fig. 2).
2. By means of the 3 mm hexagonal-end wrench (see Fig. 3), lock the depth stop at
the required distance.
3
A
C
A + C
NOTE
:
In order to avoid mechanical stress of the nosepiece do not excessively
tight the locking screw of the depth stop, particularly for plug gauges of
small diameter.
1 2