Trawl Explorer | V5 | Sensor Configuration
4.
Check the following measures:
• The temperature is consistent with the sensor environment.
• The depth is between 0 and 2m.
• The battery is between 6.9V and 8.1V.
Troubleshooting:
If depth is incorrect, you can put an offset in
Depth
>
Depth Offset
.
The other measures are only useful for the support service.
5.
To save the test results on your computer:
• Click
Save to file
to download the file.
• Or, click
Copy to clipboard
then press
Cmd + V
on a word processor like Pages to paste the
contents.
6. Marport offices only
: To add the test on the DealerWeb:
a)
Click
Copy to clipboard
.
b)
From the DealerWeb, click
Sensors
>
A1
.
c)
Enter the sensor product serial number in the search box on the right.
d)
From the part
Configuration Readings
, right-click in the box next to
Measures test
and
select
Paste
to paste the contents of the test that you copied from Mosa2.
e)
Click
Save Measures Test
.
Updating the Sensor
You can update the firmware of the sensor to the latest available version. Update to V2 or V3 when
you upgrade from an M2 to an M3 system.
|
38
Содержание Trawl Explorer
